Highlighted QSO

Whenever the user selects a QSO, either by clicking on it in the log display or scrolling to it, the associated call sign, DXCC country, and beam heading are displayed in the Highlighted QSO window, along with and set of command buttons for selecting various actions.

The command buttons control the following actions:

Check Call - Displays the current worked/confirmed status for this station in the Check Call window.  This is handy for quickly checking whether you've already worked a DXpedition or station on a particular band or mode.  I can immediately see from the display below that I have only worked 9J2SZ on 40-meter CW and that contact has not yet been confirmed.

Check Country - Displays the current worked/confirmed status for this country in the Country Status window.  As in the Check Call window, "W" indicates worked and "C" indicates confirmed.  This is handy for quickly checking whether you need this country on a particular band or mode.  In the image below I can see I need Zambia on 30, 12, and 6 meters.  I also need Zambia on PSK31 and PSK63.  This display also tells me I have lots of unconfirmed QSO's with Zambia.  I should try to get QSL's for those other unconfirmed contacts in order to increase my DXCC Challenge record!

Show Other - Displays all QSO's with this station in the log display.  The button caption is changed to "Show Normal" and pressing it again restores the original log display.

Print QSL - Marks the QSO for later QSL label printing.

QSL Sent - Marks the QSO Sent column of the log entry.

QSL Received - Marks the QSO received column of the log entry. 

Play Audio - If audio was recorded for the QSO, this button will play it back.

Delete - Delete the QSO.